| Customization: | Available |
|---|---|
| After-sales Service: | Free Repair |
| Warranty: | 12 Months |
|
Still deciding? Get samples of US$ 4000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction of Turbine flow meter
| Parameter | |
| Diameter | DN3mm-250mm |
| Medium temperature | -50ºC~+150ºC (-200ºC~+350ºC customizable) |
| Environmental Temperature | Sensor: -41ºC~+150ºC Transmitter:-41ºC~+80ºC |
| Accuracy of flow rate measurement | ±0.5%, ±0.2%,±0.1%±[(stability at zero point)/flow rate×100]% flow |
| Accuracy of density measurement | ±0.002g/cm2, ±0.001g/cm2 |
| Repeatability | ±0.10%, ±0.05% flow±[½(zero point stability/flow value)×flow |
| Output signal | 4~20mA load resistance <500 Ω(Instantaneous flow or density optional, 0~10kHz Instantaneous flow pulse signal); 485 (MODBUS-RTU) Hart |
| Electrical Port | 1/2"NPT |
| Explosion-proof grade | EX d ib II C T6 Gb |
| Protection grade | IP67 |
| Work Temperature | -25~75ºC |
| Storage Temperature | -40~85ºC |
| Power supply | 24V DC(220V AC or 24V DC and AC customizable ) |
Connections can be specially customized based on your own requirements .GB Flange\ANsi\DIN\JIS Flanges\Thread connection\Tri-clamp connections.etc
| Flow Meter Types | Type of Liquid Measured | Range(mm) | Output | Accuract | Features | Advantages | Applications |
| Electromagnetic Flow Meter | Conductive liquids (e.g., water, wastewater, slurries) | DN10-3000 | Pulse, Analog, Frequency, alarm, wireless | ±0.2%- ±0.5% | Non-intrusive, no moving parts, high accuracy | No pressure drop, suitable for dirty/corrosive fluids | Water and wastewater treatment, chemical processing, mining, paper industry |
| Ultrasonic Flow Meter | All types of liquids (clean/dirty, conductive/non-conductive) | DN15-6000 | Analog, digital, pulse | ±0.5%-±1.0% | Non-invasive, clamp-on or inline, uses sound waves | No pressure drop, suitable for large diameter pipes | Water and wastewater, gasoline, food and beverage |
| Liquid Turbine Flow Meter | Clean, low-viscosity liquids (e.g., water, light oils) | DN4-200 | Pulse,analog, digital | ±0.5% - ±1.0% | Mechanical, rotating turbine, requires clean fluids | High accuracy, good repeatability | Fuel measurement, chemical processing, water distribution |
| Coriolis Mass Flow Meter | Any liquid, including slurries and high-viscosity fluids | DN3-250 | Pulse, analog, digital | ±0.1%~±0.5% | Measures mass flow using Coriolis effect, high accuracy | Direct mass flow measurement, measures density and temperature | Chemical processing, food and beverage, pharmaceuticals |
| Oval Gear Flow Meter | Viscous and non-conductive liquids (e.g., oils, syrups) | DN10-150 | Analog, digital, pulse | ±0.5%-±1.0% | Mechanical, intermeshing gears, accurate for viscous fluids | High accuracy, good for high-viscosity fluids | Oil and gas, food and beverage, chemical processing |
| Vortex Flow Meter | Liquids, gases, and steam | DN15-200 | Pulse,analog, digital | ±1.5% | Measures vortices shed by a bluff body, no moving parts | Suitable for high-temperature/pressure, various fluids | Steam flow measurement, HVAC systems, chemical processing |
| Rotameter/Float Flow Meter | Low-viscosity liquids and gases | DN15-500 | Analog,digital | ±0.5% - ±1.0% | Simple, mechanical with float in a tapered tube, direct reading scale | Simple, low cost, no power required | Laboratory measurements, water treatment, air sampling |
| Double Rotor Flow Meter | Lliquids with varying viscosities, such as thin oil, light oil, or crude oil with high sand and water content. | DN40-DN250 | Analog, Pulse, RS485 | 0.5% / 0.2% | Handles large viscosity range; high flow rate; long service life; minimal pressure loss; remote transmission up to 1,000 meters with pulse signal output. | Stable operation; low noise; minimal wear; high accuracy; allows fine particles to pass; prevents meter sticking. | Measurement of various oils in industrial processes; high viscosity liquids in chemical and petrochemical industries; crude oil with sand and water; remote monitoring. |
| Volumetric Flow Meter | Various liquids | 230-380-750-1300L/min | ±0.2% | Measures volume, includes positive displacement meters | Accurate for total volume measurement, handles viscous fluids | Custody transfer, fuel measurement, chemical dosing | |
| Open Channel Ultrasonic Flow Meter | Liquids in open channels (e.g., rivers, streams, wastewater) | 0.1l/s~99999.99m/h | Analog, Relay,RS485, RS232, MODBUS | 0.25%- 0.5%F.S. | Uses ultrasonic waves, non-contact measurement | Suitable for open channels, no obstruction to flow | Wastewater treatment, irrigation channels, environmental monitoring |
| Open Channel Radar Flow Meter | Liquids in open channels | 40m | Analog, digital, wireless | ±0.01m/s,±2mm | Uses radar waves, non-contact measurement | High accuracy in harsh conditions, suitable for large channels | Flood monitoring, irrigation systems, environmental studies |
){kind=link}